Samsung SyncMaster 2032BW Service Manual page 13

3. Disassembly and Reassemble
Description
5. Remove the marked part from the front cover, as
shown in the figure below.
Caution: Do not lift the front cover over position (1),
which may cause damage to it.
6. Turn the monitor so the back of it is facing
upwards. Lift up and remove the back cover.
7. Use the jig to remove the shield lamp.
(Be careful Shield.)
8. Disconnect cables.
(LVDS, INVERTER and FUNCTION cable)
9. Lift up the LCD panel.
3-2
Picture Description
(A)
LVDS
INVERTER
FUNCTION
Screws