Preparations; Power Supply - Philips PET715 User Manual

PET715_ENG.QXD 21/6/05

Preparations

Power supply

Using the AC / DC adapter
Connect the supplied adapter to the set
and the main power supply (as shown).
TIP
To avoid damage to the player, switch off before unplugging the AC adaptor.
Using the car adapter
Connect the supplied car adapter to the set and the car cigarette
lighter outlet.
TIP
• To avoid damage to the player, switch off before unplugging
the AC adaptor.
• When connecting with car power (cigarette lighter) adaptor, be sure the
input voltage of the adaptor isidentical with car voltage.
Powering your remote control
1 Open the battery compartment.
Remove the protective plastic tab
(first time users only).
2 Insert 1 x lithium 3V battery, type CR2025,
then close the compartment.
Batteries contain chemical substances, so they
should be disposed of properly.
Incorrect use of batteries can cause electrolyte leakage and will corrode the
compartment or cause the batteries to burst.
Remove the batteries if the set is not to be used for a long time.
10
15:37 Page 10