HOS ORBOT MICRO Instruction Manual

Dual head orbital polisher

Table of Contents

Quick Links

Download this manual

CYCLO DUAL HEAD ORBITAL POLISHER

MODEL 5, 5-Pro, 5C AND 6CE

SAFETY INSTRUCTIONS.................................................................................................................... 1

DETAILING BASICS............................................................................................................................. 4

SAFETY INSTRUCTIONS ..................................................................................................................... 1

CYCLO POLISHER SET-UP ................................................................................................................ 5

DETAILING BASICS ............................................................................................................................. 4

GUIDE TO GENUINE CYCLO ACCESSORIES............................................................................... 6

ORBOT MICRO SET-UP ....................................................................................................................... 5

MACHINE OPERATING INSTRUCTIONS ....................................................................................... 9

GUIDE TO GENUINE ORBOT MICRO ACCESSORIES ....................................................................... 6

USER MAINTENANCE & TROUBLESHOOTING......................................................................... 10

MACHINE OPERATING INSTRUCTIONS ............................................................................................ 9

TECHNICAL SPECIFICATIONS...................................................................................................... 12

USER MAINTENANCE & TROUBLESHOOTING .............................................................................. 10

PARTS DIAGRAMS AND LISTING.................................................................................................. 13

TECHNICAL SPECIFICATIONS .......................................................................................................... 12

APPLICATION AND ACCESSORIES QUICK GUIDE.................................................................. 15

PARTS DIAGRAMS AND LISTING .................................................................................................... 13

Cyclo Toolmakers, Inc., 1740 Skyway Drive, Bldg. C, Longmont, CO 80504-5556 USA

Phone: +1-303-485-1990, Fax: +1-303-723-8680, www.cyclotoolmakers.com

The World's Most Loved Way To Polish

DUAL HEAD ORBITAL POLISHER

INSTRUCTION MANUAL

INSTRUCTION MANUA

CONTENTS

Hruby Orbital Systems, Inc.

2870 Scott St. Ste. 106, Vista, CA 92081 USA

Phone: (760) 936-8054 | (877) 716-7714 Toll Free | Fax: (760) 936-8059

www.hos-usa.com

Table of Contents

Summary of Contents for HOS ORBOT MICRO

Page 1: Table Of Contents
DETAILING BASICS ..........................4 GUIDE TO GENUINE CYCLO ACCESSORIES................6 ORBOT MICRO SET-UP ........................5 MACHINE OPERATING INSTRUCTIONS ..................9 GUIDE TO GENUINE ORBOT MICRO ACCESSORIES ............... 6 USER MAINTENANCE & TROUBLESHOOTING................. 10 MACHINE OPERATING INSTRUCTIONS .................... 9 TECHNICAL SPECIFICATIONS...................... 12 USER MAINTENANCE &...
Page 2: Safety Instructions
This instruction manual is furnished with each Orbot Micro. The entire manual should be read carefully before using the Orbot Micro and retained for future reference. ® This instruction manual is furnished with each Cyclo Model 5, 5-Pro, 5C & 6CE Electric Dual Head Orbital Polisher. The entire manual should be read carefully before using the Cyclo Dual Head Orbital Polisher and retained for future reference.
Page 3 Grounding Instructions tt) The Orbot Micro should always be electrically grounded while in use to protect the operator from electric shock. This tool is equipped with an approved three- conductor cord and three-prong grounding type plug to fit the proper grounding type receptacle. The green or green/yellow conductor wire in the cord is the grounding wire.
Page 4 Handles Should Remain Insulated. Do not operate the tool without the properly insulated handles. NOTE: If shrink wrap insulation on the rear metal handle is damaged or is removed at the time of repair, it must be replaced before the tool is put back into service. The proper precut length is available from Orbot Micro or your dealer.
Page 5: Detailing Basics
DETAILING BASICS DETAILING BASICS This section presents the basic steps involved in vehicle detailing, much of which is accomplished without your Orbot Micro. More instructions on polisher operation are provided later in this manual. This section presents the basic steps involved in vehicle detailing, much of which is accomplished without your Cyclo polisher. More instructions on polisher Washing operation are provided later in this manual.
Page 6: Cyclo Polisher Set-Up
Head Assemblies (60-055) Head Assemblies (60-055) • Center pads easily and save time by simply snapping the pads in place. System replaces Orbot Micro heads to hold 77- Series Double-Precision, two-sided pads. The original backing plate for Rubber Pad Holders or foam and wool bonnets (71- series foam and wool...
Page 7: Guide To Genuine Cyclo Accessories
CTI Pro Paint Care Polish and Protective Sealant – Our Polish and Protective Sealant is a highly protective sealant that will give your surface up to Orbot Micro products are specifically formulated for use with the Orbot Micro and though some machine application type polishes may give satisfactory results, 6 months of durable protection and brilliant gloss.
Page 8 77-415 The numbering system for each family of Genuine Orbot Micro accessories indicates relative aggressiveness, considering all physical characteristics of the materials. Note the last two digits in all cases. In our part numbering system, a 72-145 foam pad is more aggressive than our 72-120 foam pad. A 77-435 is more aggressive than a 77-415 wool pad. The hundreds digit (i.e.
Page 9 Genuine Orbot Micro Scrub Brush Selection Guide Your Orbot Micro is also a scrubber. Fitted with Genuine Orbot Micro brushes, its action mimics the motion of hand-scrubbing. By simply attaching two Orbot Micro Brushes to the machine you can clean carpet, upholstery, boat decks, tile, grout and more. The orbiting motion of the Orbot Micro brushes combined with the brushes’ high quality bristling safely cleans leather, fabric, upholstery and carpets.
Page 10: Machine Operating Instructions
Apply a small amount of the proper polish or compound to each pad, just enough to spread across and fully cover the pad. c) Place the Orbot Micro, pad side down on the surface, move the tool around before turning it on in order to distribute the polish within the pad over the surface.
Page 11: User Maintenance & Troubleshooting
Be sure the polisher is disconnected from the electrical supply before any inspection or maintenance is performed. The motor is only for the voltage specified on the nameplate. Voltage should not vary more than 10% over or under the voltage shown on the nameplate. Although the Orbot Micro is built to last a lifetime, it can encounter problems from heavy wear and tear.
Page 12 Save Your Box: Your Orbot Micro was sent to you in a special container designed for safe storage. We recommend that you keep this box for storing your Orbot Micro. You will also want to use this box in case you need to send your machine back to the factory for service.
Page 13: Technical Specifications
THE APPEARANCE OF YOUR CYCLO POLISHER Every ORBOT Micro is hand crafted with the same superior level of quality and workmanship. As all handmade items will vary slightly, we cannot guarantee that each polisher will be identical with every other one of our polishers. You may notice light sanding or buffing marks in the Each of our Cyclo Polishers are hand crafted with the same superior level of quality and workmanship.
Page 14: Parts Diagrams And Listing
ORBOT MICRO PARTS DIAGRAMS CYCLO POLISHER PARTS DIAGRAMS Model 5, 5-Pro & 5C Model 6CE...
Page 15 ORBOT MICRO PARTS LIST Indicator Number Description Handle, Plastic Front, Polisher Needle Bearing Short Shoulder Bolt for Retaining Cover Plate Metal Cover Plate Screw, Handle Retaining Nylon Drive Gear, Connects to Counterweight Nylon Idler Gear (Center Gear) Main Gear Case...