Test For Tightness - Graco snugride snuglock 35 dlx Instruction Manual

9. Test For
Tightness
Grab the sides of
the base where the
LATCH strap is and
push and pull the
base from side to
side and front to
back.
If the base moves
less than 1" (2.5
cm), it is tight
enough.
10. Attach Car Seat
to Base
Place car seat into
the base. Push down
on the front of the car
seat and handle until
you hear a "click".
Test to make sure the
car seat is attached
by pulling up on the
front corners of car
seat.
31
CLICK!