Error Message; Setting The Clock; Oven Function - DeLonghi EO241250 Manual

ERROR MESSAGES
If ERR message is shown on display, with relevant acustic sig-
nal, the oven had a malfunction. Press START/STOP button (H)
for 2 seconds to reset the control and disconnect the plug from
wall outlet. Check troubleshooting section.

SETTING THE CLOCK

The first time the appliance is connected to the main electricity
supply or after it has been without power for some time, it play a
beep and four dashes ("-- : --") appear on the display.
After 5 seconds the display will turn off, due to the clock has not
been set, and the electronic control go on stand-by state.
To set the time, proceed as follows:
Press the START/STOP button (H) for at least 5 seconds.
The hour flashes.
Set the required hour with TOAST COLOR/TIME dial (G).
Press the START/STOP button (H). The minutes flash.
Set the required minutes with TOAST COLOR/TIME dial (G).
Press the START/STOP button (H). The set time is displayed.
If you want to adjust the time later, repeat the setting procedure
described above. The electronic control must be in stand-by
state to adjust the clock.

OVEN FUNCTION

In the stand-by state, the Display shows the clock (if set) or --:--.
• Press any button (H L N) or turn any dial (G M O). The oven turns
on. This is the Function selecting state. The Default selected func-
tion is BAKE. The modifiable values flash.
If during function selection state no button are pressed or dial
are turned whitin 2 minutes, the control comes back in stand-by
mode.
• Turn the FUNCTION selection dial (O) to select the function want-
ed.
• Turn the TEMPERATURE/PIZZA SIZE/SLICES/TRAY dial (M) to set
the temperature if needed (not required in some programs). In
some function the temperature is automatically set (the display
doesn't show the preset temperature).
In the PIZZA function set the size.
In the COOKIES function set the number of trays.
• Turn the TOAST COLOR/TIME dial (G) to set the timer if needed.
- Both PIZZA and COOKIES functions have a preset timer.
- In PIZZA function the time will change depending on the selected
size.
- In COOKIES function it is possible to modify the cooking time.
• Press the START/STOP button (H) to start cooking. T he red ON light
(I), that is located around the edge of the START/STOP button (H)
, turns on. When the timer elapsed, the display shows "End" and
play a sound signal.
Press START/STOP button (H)m to reset the oven and stop the
function. It is possible to interrupt the cooking process at any time
by pressing START/STOP button (H). The oven goes into stand-by
condition. In the BAKE, CONVECTION and COOKIES functions, the
oven play a sound signal when the first target temperature is
reached. In BAKE and CONVECTION function is possible to check
the cavity temperature by pressing the
check button (L). The temperature is displayed for 5 seconds.
• Is possible to choose the temperature visualization in °F or in °C.
Default setting is in °F. To change setting select BAKE or CONVEC-
TION function, press Cavity temperature check button (L) for 5
seconds. The visualization will change to °C with acustic signal. To
come back to °F visualization repeat the same oparation.
7
Cavity temperature