Troubleshooting - DeLonghi EO241250 Manual

TROUBLESHOOTING

ERROR
MESSAGE ON DESCRIPTION
DISPLAY
E0:11 Temperature probe
Err malfunction
E0:12 Temperature probe
Err malfunction
Target temperature
not reached:
E0:21
The oven cannot reach
Err
the target tempera-
ture in a reasonable
time range
Over temperature:
E0:22
The oven reaches
Err
excessive temperature
Unexpected heating:
The temperature
E0:27 probe detected a
Err temperature rise when
heating elements
should be OFF
POSSIBLE
PROBLEMS
Record the error number.
The electronic control Reset the control by pressing START/STOP button (H) for
detected a malfunc- 2 seconds and disconnect the plug from wall outlet.
tion on temperature The temperature probe need to be replaced.
probe Contact a De'Longhi customer service reporting the error
number.
Record the error number.
The electronic control Reset the control by pressing START/STOP button (H) for
detected a malfunc- 2 seconds and disconnect the plug from wall outlet.
tion on temperature The temperature probe need to be replaced.
probe Contact a De'Longhi customer service reporting the error
number.
Record the error number.
Reset the control by pressing START/STOP button (H) for
2 seconds and disconnect the plug from wall outlet.
The electronic control First check that the oven door has been closed during
detected an excessive the use.
time to reach the If door is kept open while in use , the oven cannot reach
target temperature the target temperature.
inside the oven If oven door was properly closed, the heating elements
could be damaged.
Contact a De'Longhi customer service reporting the error
number.
Record the error number.
The electronic control Reset the control by pressing START/STOP button (H) for
detected an excessive 2 seconds and disconnect the plug from wall outlet.
temperature inside The electronic control could be damaged.
the oven Contact a De'Longhi customer service reporting the error
number.
Record the error number.
Reset the control by pressing START/STOP button (H) for
2 seconds and disconnect the plug from wall outlet.
The electronic control
This error may be showed when the oven start the
detected an unexpect-
DEFROST function when it is still warm from a previous
ed temperature rise
cooking process.
inside the oven, when
Let the oven cool down before start the DEFROST
heating elements
function.
should be not
If above case was not, the electronic control could be
energized
damaged.
Contact a De'Longhi customer service reporting the error
number.
23
SOLUTION