Step 5: "Using The Sonicwall Setup Wizard - SonicWALL TZ 170 SP Quick Start Manual

Using the SonicWALL Setup Wizard
5
The SonicWALL Setup Wizard provides easy to follow instructions for configuring the TZ 170 on
your network. The Setup Wizard pages display different pages depending on which TZ 170
security appliance model you are configuring:
SonicWALL TZ 170 SP - the Setup Wizard helps you set up Internet connectivity on your WAN
port and your modem port, dialup backup for your WAN port, and networking on your LAN port.
SonicWALL TZ 170 Wireless - the Setup Wizard helps you set up your wireless networking
environment, Internet connectivity on your WAN port, and networking on your LAN port.
Note! Make sure you have any required ISP information to complete the configuration before using the
Setup Wizard.
Tip! Certain browser configurations may not launch the Setup Wizard automatically. In this case, you
must log into the TZ 170 using "Admin" as the User Name and "password" as the Password. After you
log into the TZ 170, click the Wizards button on the System > Status page. Select Setup to begin
configuring the TZ 170.
Configuring the TZ 170 SP for Network to Internet Connectivity
1. Welcome - read the information on the Welcome dialogue box. Click Next.
2. Change Password - change the TZ 170 password to your personal password. Click Next.
Alert! Remember your password. You will need it to access the SonicWALL TZ 170 Management Interface
after the initial configuration.
3. Change Time Zone - change the Time Zone setting to your location's time zone. Click Next.
4. Configure Modem - select whether you will use the modem as a backup for the WAN connection, use
it for primary Internet connection, or don't want to use it. Click Next.
If you are using the modem as a backup for the WAN connection, in the Stand-alone Dial-up
Connection page, enter your dial-up account information in the Phone Number, User Name, and
Password fields. Click Next.
Page 12