Bosch Greentherm 9800 SEO 160 Installation And Operating Instructions Manual page 37

Fig. 32 199kBTU appliance gas conversion kit
Fig. 33 160kBTU appliance gas conversion kit
▶ Tighten the four screws.
▶ Open the gas supply valve.
▶ Place the front cover.
▶ Turn On the appliance power.
▶ Install temporally the CO
the following adjustments.
▶ Access service mode by pressing and hold down at the
same time, ,
Display with indication "P2".
Greentherm 9800 SEO 160/199 | SECO 199
analyzer next to the appliance for
2
and for 3 seconds.
▶ Press buttons or
▶ Press .
▶ Press buttons or
according to table 19.
▶ Update "TYPE OF GAS" in the rating plate of the appliance
using the label provided with the gas conversion kit.
Gas type
Natural gas
Propane
Table 19
▶ After changing the type of gas, proceed with the adjusting
maximum flow (P1) and minimum flow (P2) described in
section 10.11 Adjusting Gas/Air flow.
Troubleshooting | 37
until the display shows "P7".
and select the gas type
Display
20
31
6 720 817 281 (2017/05)