Download Print this page
Fleetwood L - 02 Instruction Manual
Fleetwood L - 02 Instruction Manual

Fleetwood L - 02 Instruction Manual

Industrial blenders

Advertisement

Quick Links

ONE YEAR LIMITED WARRANTY
The original registered owner of this
should contact SKYFOOD EQUIPMENT LLC at 305-868-1603 for any
warranty problems or service. SKYFOOD EQUIPMENT LLC will repair
or replace parts at our option for period of one year if unit fails to perform due
to defects in material or workmanship. Freight if required is at owner's
expense. Warranty does not include misuse or damage due to abuse as
determined by SKYFOOD EQUIPMENT LLC inspection. Units that are
70 lbs., or less are considered carry in and should be taken to an authorized
service facility.
Please read all safety instructions.
SERIAL #______________MODEL_______________
DETACH AND KEEP TOP PORTION
-------------------------------------------------------------------------------------
LIMITED WARRANTY REGISTRATION
OWNERS NAME
BUSINESS
ADDRESS
MODEL #
PURCHASED FROM
FILL OUT ABOVE INFORMATION AND MAIL OR FAX TO
SKYFOOD EQUIPMENT LLC:
Office: PO BOX 416702, Miami Beach, FL 33141-3230 –
Phone: 305 868 1603– Fax: 305 866 2704
Sales & Warehouse: 71 Bloomfield Ave, Newark, NJ 07104 –
Phone: 973 482 5070 – Fax: 973 482 0725
commercial@skyfood.us www.skyfood.us
TOLL FREE 800 445 6601
product
SERIAL #
INSTRUCTIONS MANUAL
INDUSTRIAL BLENDERS
MODELS
L - 02/04/06/08/10HD
L - 02/04/06/08/10HD
32606.2 Dezembro/2008

Advertisement

loading

Summary of Contents for Fleetwood L - 02

  • Page 1 Office: PO BOX 416702, Miami Beach, FL 33141-3230 – MODELS Phone: 305 868 1603– Fax: 305 866 2704 Sales & Warehouse: 71 Bloomfield Ave, Newark, NJ 07104 – L - 02/04/06/08/10HD L - 02/04/06/08/10HD Phone: 973 482 5070 – Fax: 973 482 0725 commercial@skyfood.us www.skyfood.us –...
  • Page 3 SUMMARY IMPORTANT Always unplug the machine when emergency cases arise. Introduction 4.7 Advice Electrical or mechanical maintenance must be done by qualified personal for such 1.1 Safety operation. 1.2 Main Components Person in charge has to be sure that the machine is under TOTAL SAFETY 1.3 Technical Characteristics conditions when working.
  • Page 4 1. Introduction 4.3 Routine Inspection 4.3.1 Advice 1.1 Safety When checking the tension of the belts or chains, DO NOT introduce your fingers between the belts and the pulleys and nor between the chain and the gears. The Heavy Duty Industrial Blenders are machines simple to use and to clean. However for your safety read the following instructions in order to avoid accidents: 4.3.2 Precautions 1.1.1 Always unplug the machine when cleaning, servicing or when any other operation is needed.
  • Page 5: Installation And Pre Operation

    1.3Technical Characteristics 4.1.3 Advices Table – 01 In case of power shortage, immediately turn the machine OFF. Unit L-02HD L-04HD L-06HD L-08HD L-10HD Caracteristics Use recommended or equivalent lubricants, oils or greases. 110/220 110/220 110/220 110/220 110/220 Voltage Frequency [Hz] 50 ou 60 50 ou 60 50 ou 60...
  • Page 6: Operation

    3. Operation Follow the below instructions for washing removable parts: 3.1 Starting 3.3.1 Unplug the machine. 3.3.2 Remove the Lid Nº01 first then the Cup Nº02 (Pic.01). 3.3.3 Wash all removable parts with running water and neutral soap. IMPORTANT 3.3.4 To reinstall them, follow the above order inversely. Before removing or installing the Cup Nº02 (Pic.01) be sure the motor has completely stopped in order to avoid coupling premature wear out.

This manual is also suitable for:

L - 10hdL - 04L - 06L - 08