Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lami Corporation Lotus-13 LK
Summary of Contents for Lami Corporation Lotus-13 LK
- Page 1 Instrustion Manual 2014.05 Rev.1...
-
Page 2: Operating Panel
At the beginning Thank you very much for purchasing from us.【 】 This operating instruction is for using this machine safely. Before you use the machine, please read this document and use the machine properly. Please keep the document with good care in order to be available when you use the machine. Contents ■At the beginning ... - Page 3 Before you use… 本機は、Ａ３サイズ対応のパックタイプラミネーターです。白黒コピーからメニューまで幅広い用途で使用 Characteristic of the machine できます。また、長時間の連続使用時に安定した仕上りで品質の高いラミネート加工が可能です。 Characteristic of the machine below. ●Stable heat following. Stable heat following with inside heat rollers. You can laminate massive printed matters or thick papers with high quality. ●Fast laminating with 6 rollers. This machine has inside heat rollers back and forth,It conducts heat tightly to film in fast laminating.And last pulling roller makes finished goods more beautiful.
- Page 4 Cautions of handling Warning Use attached power code. Use indicated power source only. Do not place heavy objects on the power code. Do not place the cable near heating equipments. Do not modify power code. Do not use damaged power code. Do not overloaded. Please insert the plug completely up to the base of the electrode portion.
- Page 5 Attachments The body, parts of the following accessories are included. If these attachments has insufficient, please contact your dealer or sales office of your nearest. Machine Power Code...
- Page 6 Suitable place for installment Install the machine on a place like below. ●Horizontal and suitable place It causes harm of paper feeding or unexpected accidents when you use the machine in inclined state, unstable state. Install the machine on a horizontal and stable place. ●Place with special power outlet Do not use any power source which is not described in this document.
- Page 7 Name of each parts of the machine Front of the machine Top Cover Transparent cover Body Cover Film Entry Insert paper material with laminate film. Operation Panel You can adjust temperature and velocity. Setting will be displayed in LCD panel. Back of the machine Film Exit Power Switch...
-
Page 8: Operation Panel
Operation Panel Description of buttons You can operate the machine with buttons below. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ① LCD Panel This LCD shows setting of temperature, velocity, and status of fans and rollers. If error is shown in LCD panel when working there is a possibility of trouble inside. In this case, please describe situation, and contact to our dealers or us. - Page 9 ④ COLD button Pressing this button switch COLD mode. When you press this button, roller heating stops and velocity is changed to 5. ⑤ Temperature adjustment button You can adjust temperature 0°C ~ 140°C at 1°C increment. Adjust adequate temperature for printed material which you want to laminate. ⑥...
- Page 10 Before lamination Composition and thickness of laminate film There are 2 kinds of film, “Roll film” and “Pouch film”. You must use “Pouch film” for the machine, ※ You can not use “Roll film” for the machine. Construction of film Pack type laminate film is two sheets set on one side sealed.
- Page 11 Film size and variety There is a standard size film and special order size film which is cut into a size of your choice. Refer to below and use appropriate film. If you use inappropriate film, you can not laminate adequately or you have failure with the machine. *Pay attention to card sized material less than 100mm because of difficulty of taking out.
- Page 12 Object suitable for lamination Object (manuscript paper) which you can laminate is depends on kinds of laminator. This machine can laminate photo or color copied material with inside of roller heating structure. Some material below is not suitable for lamination because of mechanical characteristic. ●...
- Page 13 Lamination processing Procedure of lamination processing Please refer to procedure below when laminating. Preparation of the machine ① Install the machine on suitable place and turn on the power switch which is back of it. ② Adjust adequate temperature for lamination material. ③...
- Page 14 Reference information Adequate temperature and velocity make finish pretty good condition. Refer to recommended setting temperature P12, and do lamination with adequate temperature and velocity which is suitable for each paper. Inside structure of the machine Lamination Material（Paper＋Film） Heat Roller Pulling Roller ②...
- Page 15 Maintenance Regular daily roller cleaning We recommend regular cleaning of rollers depending on usage. Y ou can maintain the performance of the machine and keep good finish by easy cleaning. Cleaning method ● Prepare thick paper like drawing paper. (Some Lami’s pouch lamination film has special cleaning paper) ●...
- Page 16 Before you think machine failure In case that you can not turn on the machine, or it does not work ●Plugging in power plug, confirmation of power switch. This machine is for AC230V. Please check power plug is properly connected. Please check power switch is on.
- Page 17 In case that you can not laminate adequately ●Confirmation of setting of temperature and speed Check that adequate temperature and velocity for lamination is set referring from P12. If they are not adequate setting, you may have trouble below. ① Bubbles are generated. →...
- Page 18 Others Product Specification Machine name Max.laminating width A3 size（325 mm） A2 size（480 mm ） Max.pouch thickness 250μ Max.laminating speed 1.4 m/min 1.2 m/min Roller heating Room temp.～ 140 ℃ Heating method Inside heating system Power requirements AC230V 50/60Hz Power consumption 1250W Size (W x D x H) 555×280×140...
Need help?
Do you have a question about the Lotus-13 LK and is the answer not in the manual?
Questions and answers