Operations - Bissell POWERGLIDE LIFT-OFF PET PLUS 2043 SERIES User Manual

PowerBrush Switch
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
1
Power
On/O
Switch
Turn vacuum on by pressing Power
Switch on (I - ON and O - OFF).
NOTE: The brush roll will automatically shut off when vacuum is locked in upright
position, recline to reactivate.
NOTE: Turn the Brush Roll OFF when vacuuming hard or delicate surfaces that
may be caught by the rotating brush. This could include hard wood, tiled floors,
small area rugs or frieze carpets that have long delicate fibers or threads.
Adjusting the Variable Suction
1
NOTE: The vacuum will come with the Variable Suction Valve closed for full
suction power.
6
www.BISSELL.com
Locate the Variable
Suction Control
suction control
Valve on the Hose
Wand Base.
Twist Valve - Marker
moves to indicate
FULL
suction level
2
Press the Brush Roll switch to run the
PowerBrush for carpet cleaning (brush roll
is on when light on switch is illuminated).
2
REDUCED
suction control
Full
Twist Valve - Marker
To decrease the
Suction
FULL moves to indicate
amount of suction
suction level
for cleaning delicate
Reduced
carpets, curtains,
Suction or rugs; twist the
variable suction valve
counterclockwise.
Brush Roll
On/O Switch
REDUCED