Advertisement
1. Place one hand on top of the tilting head while, with the other hand,
pushing downward (clockwise) on the head release lever. Guide the
tilting head to its up and locked position.
2. Place the bowl onto the base, and turn it clockwise, until the bowl locks
in securely.
3. Insert the desired attachment onto the shaft, push upward and turn
counterclockwise to secure in place.
4. Add ingredients per your recipe.
5. Place one hand on top of the tilting head while, with the other hand,
pushing downward (clockwise) on the head release lever. Guide the
tilting head to its down and locked position.
6. Place the bowl cover on the bowl, then attach the chute cover and push
it down to secure it in place. (If you need to add more ingredients while
mixing, lift the chute cover.)
7. Plug the cord into the outlet.
8. Select mixing speed per your recipe (see table below).
9. When finished mixing, turn the speed control to "0" (OFF). Unplug the
cord from the outlet.
10. Remove the chute cover and bowl cover.
11. Place one hand on top of the tilting head while, with the other hand,
pushing downward (clockwise) on the head release lever. Guide the
tilting head to its up and locked position.
12. Remove the attachment by lifting it, turning it clockwise, then pulling it
down and off the shaft.
13. Turn the bowl counter-clockwise to unlock and remove it. Use a spatula
to scrape the sides and bottom of the bowl.
SPEED
1
2 & 3
4 & 5
6 & Pulse
6
HOW TO OPERATE
Ginnys.com
USED FOR
Slow Mixing
Mixing & Beating
Beating & Creaming
Fast Beating & Whipping
800-544-1590
Advertisement
