Advertisement
Lock Motor Head
1. Make sure the mixer is OFF and unplugged.
2. Turn the head release lever to the right and tilt the motor head back. The
head is locked in the up position.
3. Turn the head release lever to the right and tilt the motor head down.
The head is locked in the down position.
Attach Bowl
1. Make sure the mixer is OFF and unplugged.
2. Turn the head release lever to the right and tilt the motor head back.
3. Place the bowl on the turntable. Hold the turntable steady with your left
hand and twist the bowl clockwise with your right hand to lock it in place.
4. Turn bowl counterclockwise and lift to remove.
Attach Beaters or Dough Hooks
1. Make sure the mixer is OFF and unplugged.
2. Turn the head release lever to the right and tilt the motor head back.
3. Insert the "L" and "R" marked beaters/hooks into the corresponding holes
under the motor head. Press upward until the beaters/hooks click into
place.The beaters will spin the bowl when you slide the location lever to
the right.
4. Press the eject button to release beater/dough hooks.
Note:
Do not scrape the bowl while the mixer is operating. Turn the mixer
off before scraping the bowl with a spatula. The bowl and beaters/
hooks are designed to provide thorough mixing without frequent
scraping. Scraping the bowl once or twice during mixing is usually
sufficient.
6
HOW TO OPERATE
Ginnys.com
800-544-1590
Advertisement
