Summary of Contents for Mifold Grab-and-Go Booster
Page 1
Grab-and-Go Booster ® 4 to 12 years Group 2/3 (15-36kg) Approved to ECE R44.04 P/N - 1021 Rev D...
Page 2
Congratulations on buying your mifold User Manual Storage Grab-and-Go booster seat. mifold is the most advanced, compact, and portable booster seat It is most important that these instructions ever invented. mifold is more than 10x smaller remain with the mifold Grab-and-Go booster seat than a regular booster seat, and is just as safe*.
Grab-and-Go Booster Seat Features Shoulder Belt Guide Strap Booster Seat Shoulder Belt Guide Lap Belt Guide (RH & LH) Shoulder Belt Guide Buckle Lap Belt Slot (RH & LH) Booster Seat Cushion Lap Belt Guide Release Button (RH & LH)
Always replace the booster seat after any accident in case of any unseen damage. Your mifold Grab-and-Go booster seat must be positioned and installed so that, Store your booster seat in a safe area when under normal vehicle usage conditions, your child is not in the car seat.
Prepare Your Install your booster seat Booster Seat The seat can be used for a child approximately 4 years to 12 years, weighing 15kg – 36kg, securing the child with the adult 3 point seat belt approved to ECE R16. Note: Your car seat is designed to fit only with a 3 point lap and diagonal seat belt and must not at any time be fitted using only a...
Page 6
Extract the lap belt guides and position Ensure that the shoulder belt guide according to the chart. is positioned above and centred on your child’s shoulder. To access the To shorten or lengthen shoulder belt guide the shoulder belt guide strap, pull open the pull the strap in the shoulder belt guide...
Install Your Booster Seat Position your child sitting upright on the booster seat and if necessary, slide lap belt guides into the position nearest to, but not touching the child’s thigh. Pull out on lap belt guides to check they are locked into position. Ensure that the booster seat is laid flat and up against the back rest of the vehicle seat.
Page 8
WARNING! If the vehicle seat belt tongue is up against the red lap belt guide such that you cannot tighten the seat belt, this condition is unacceptable. You must use a different seat position. To position the shoulder belt guide, attach the shoulder belt guide to the diagonal portion of the vehicle seat belt, by opening the clip and inserting the seat belt.
Final checklist However safe a child seat is, however well built it is, your child’s safety depends on you carrying out the following checks before every journey: Check that the booster seat is facing forwards in the vehicle and in the direction of travel.
Maintenance advice Notice The booster seat cover is not removable. In case This booster seat is a “Universal” child restraint of light staining, clean using a damp cloth system. It has been approved in accordance or soapy water. with regulation ECE R44/04, and is suitable for general use in vehicles, and is compatible with the majority of vehicle seats.
Page 11
Tel: +44 207 323 9514 support@mifold.com @mifoldBooster www.mifold.com/contact pinterest.com/mifold facebook.com/mifold instagram.com/mifold Manufactured by: carFoldio Ltd. Unit 2407, PO Box 6945 London, W1A 6US, England, U.K. Tel: 0800 4714984 (from within the U.K.) Tel: +44 207 866 2385 (International) the Grab-and-Go Booster ®...
Need help?
Do you have a question about the Grab-and-Go Booster and is the answer not in the manual?
Questions and answers