Alignment Instructions - Insignia ns-lcd37hd-09 Service Manual

Alignment instructions

1. Test equipment
VG-848 (YPbPr, VGA signal generator)
CA210 (white balancer)
2 Alignment flow-chart
The alignment flow-chart is shown as fig-1
Connect to the center signal source and check if various
functions of TV (station leaking, analog control), earphone
and speaker output are normal
Input AV/SVIDEO signal source and check the functions
Input HD signal source and check the function
Input VGA signal source and check the display, various
functions (analog control) and H/V center.
Input HDMI signal source and check the display, various
functions (analog control) and H/V center.
Insert the USB device and check the function
Check if DDC and FLASH are written
Produce the digital processing board
Combined test for general assembly
White balance adjustment
Preset ex-factory
Check the accessories and pack
Fig-1 adjustment flow-chart
3