Configuring Your Macintosh Computer - Philips SNB6500 User Manual

3 Type 'IPCONFIG /RENEW' and press the ENTER key. Verify that your IP
Address is now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your
Default Gateway is 192.168.1.2. These values confirm that your Wireless Router
is functioning.
Type 'EXIT' and press the ENTER key to close the Command Prompt window.
Your computer is now configured to connect to the Wireless Router.

Configuring Your Macintosh Computer

You may find that the instructions here do not exactly match your operating system.
This is because these steps and screen shots were created using Mac OS 10.2. Mac
OS 7.x and above are similar, but may not be identical to Mac OS 10.2.
Follow these instructions:
1 Pull down the Apple Menu. Click System Preferences.
2 Double-click the Network icon in the Systems Preferences window.
3 If 'Using DHCP Server' is already selected in the Configure field, your computer is
already configured for DHCP. If not, select this Option.
4 Your new settings are shown on the TCP/IP tab. Verify that your IP Address is
now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway
is 192.168.1.2. These values confirm that your Wireless Router is functioning.
5 Close the Network window.
Now your computer is configured to connect to the Wireless Router.
EN
39