Specifications; Troubleshooting - Aqua One NanoPlas 7 Instruction

8. Also disconnect the outlet tube and run the
piping brush through the outlet at the top
of the power head as well as the tube.
9. Reconnect all parts and place pump back
in.
10. Ensure hands are dried.
11. Plug power cable in and turn on .

Troubleshooting

BUBBLES ARE COMING OUT THE
OUTLET INTO THE AQUARIUM
1. The water level in the filter is too low. Add
sufficient water so that the pump is fully
submerged.
WATER FLOW INTO THE AQUARIUM
HAS DROPPED
1. Pump needs to be cleaned. Refer to
maintenance instructions in the supplied pump
instruction manual in order to clean the pump
impeller and impeller housing.
2. Outlet is blocked. Remove and clean the
outlet tube.

Specifications

Aquarium Model: NanoPlas
Overall Dimensions: 18 x 23 x 23cm
Aquarium Volume: 7.6L
Return Pump Flow Rate: 300L\hr
Light Wattage: 2W LED
Power Requirements: 220 ~ 240V
Suitable: Tropical, Coldwater
Disposal of used Electrical & Electronic Equipment
(Applicable in the European Union and other
European countries
systems)
This symbol on the product or on its
packaging indicates that the product
must not be disposed of with normal
household waste. Instead, it is your
responsibility to dispose of your waste
equipment by arranging to return it to a designated
collection point for the recycling of waste electrical
and electronic equipment. By separating and recycling
your waste equipment at the time of disposal you will
help to conserve natural resources and ensure that the
equipment is recycled in a manner that protects human
health and the environment. For more information
about recycling this product, please contact your local
city office, your household waste disposal service or
the shop where you have purchased the product.
6
with separate collection