Setting Up The Monitor; Installation - Philips BRILLIANCE 221C5 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

P ackage contents
* HDMI Cable
Audio Cable
*Depends on country.
Display design may differ from that illustrated
Note
Use only the AC/DC adapter model: Philips
ADPC1965
使用 前请阅读使用说明
保留备用
Philips and the Philips' Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license from Koninklijke
VGA Cable Philips N.V.
USB Cable Power Cable
Connecting to your computer or
SmartPhone
9
8
221C5
User's Manual
Monitor drivers
SmartControl software
DC power input
1
VGA input
2
HDMI input
3
MHL-HDMI input
4
DisplayPort input
5
USB downstream
6
USB uptream
7
Earphone jack
8
Audio input
9
Kensington anti-theft lock
10
Connect to PC
1. Connect the power cord to the back of
the monitor firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the monitor signal cable to the
video connector on the back of your
computer.
4. Connect the PC audio cable to the audio
connector on the back of your computer.
5. Plug the power cord of your computer and
your monitor into a nearby outlet.
6. Connect the USB upstream port on
the monitor and the USB port on your
computer with a USB cable.
The USB downstream port is now ready
for any USB device to plug in.
7. Turn on your computer and monitor. If the
monitor displays an image, installation is
complete.
4
7 6 5 4 3 2 1
10
4
4
7
9
3
2
5