Connecting The Power; Stream Music Using Bluetooth; Entering Bluetooth Mode; Pairing Bluetooth Devices - Monitor Audio ASB-10 Owner's Manual

Connecting the Power

Now that all of the signal cables are connected, it is time to connect the power.
IMPORTANT: Please follow the below instructions in sequence.
1. Connect the mains lead to the ASB-10 .
2. Connect to wall socket and where applicable turn on.
3. The ASB-10 start in standby mode (solid Red LED). Press the standby
button to activate the ASB-10. The front LED will flash Blue during bootup
and settle on the last selected input.
6

Stream Music Using Bluetooth

Entering Bluetooth Mode

Before proceeding, please ensure the ASB-10 is turned on from standby mode.
Press the Bluetooth Source button on the front of the ASB-10 (item 3 on page
3) to enter Bluetooth pairing, the LED will start flashing Cyan.

Pairing Bluetooth Devices

With Bluetooth now being such a widely used protocol across a vast array of
devices such as iOS, Android, PC, Mac and Windows Phones the process of
connecting via Bluetooth will vary across devices. Below are some generalised
steps to get you started but please refer to your device's instructions for more
information.
1. Go to the Bluetooth settings of your playback device and enable Bluetooth,
2. Select and connect to 'Monitor Audio ASB-10..' . Once paired, the LED on
the front of the ASB-10 will change to solid Cyan.
3. Start playing audio from your device using your preferred application.
NOTE: Volume controls will remain independent of each other.

Unpairing Bluetooth Devices

When a device has been previously paired (the ASB-10 will store the 5 most
recent devices) it will automatically pair when the ASB-10 is available and
Bluetooth is enabled on said device. When paired with a device the ASB-10's
front LED will be solid Cyan in the Bluetooth input.
1. To pair a new device and disconnect the currently connected device hold
down the Bluetooth Source button (item 3 on page 3).
2. Once unpaired with a device the ASB-10's front LED will start flashing Cyan.
ASB-10