Troubleshooting - Philips BT112 User Manual

Troubleshooting

Warning -
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty.
below before taking the system for repair. If you are unable to remedy the problem by following hints
mentioned in below table, Consult your dealer or PHILIPS APSC for help.
Problem
1. No power.
2. No sound or distorted sound.
3. Low hum or buzz sound.
4. No response from the speaker.
5. The audio quality is poor after
connection with Bluetooth enabled
device.
6. Cannot connect with the device.
* In case these measures do not work contact the nearest PHILIPS service center or call at customer care numbers.
Solution
Charge the unit by using USB charging cable.
Adjust the volume / select the correct source to choose the equipment
that you want to hear through the system.
Place the product as far away as possible from electrical devices that may be
causing interference.
Restart the speaker.
Move the device closer to this product or remove obstacle between them.
This product is already connected with another Bluetooth enabled device.
Disconnect that device and then try again.
7