List All Registers; Read/Write Register; Figure 5-2: List All Registers Screen Display - Philips ISP1301 User Manual

Philips Semiconductors
5.3.3.

List all registers

On selecting this option, the program will display all the 22 registers on the screen. See Figure 5-2.
5.3.4.

Read/Write register

The program will display the current value of all registers and prompt you to write to a specific register.
On selecting item 4 from the main menu, the program will display the screen given in Figure 5-3. The program will
prompt you to type the address of the register whose value you want to change. On entering the address of the
register and pressing Enter, the program will prompt you to enter the new value that you want to assign. If you
want to return to the main menu, type FF at the command prompt.
UM10028_1
User's Guide
ISP1301 USB OTG Transceiver Eval Kit User's Guide

Figure 5-2: List all registers screen display

Rev. 1.0—February 2003
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
10 of 18