CABAC HNS220TD Owner's Manual

HNS220TD
OWNER'S MANUAL
Scan our QR code
with your phone to go
directly to our website
for technical information
1. FEATURES
• Push button timer with ON/OFF and ON/RESTART operations.
− Quick tap turns power ON/ OFF, or
− Sustained 2 seconds press restart the timer.
• Adjustable Timer Range from 10 seconds to 15 hours.
• Configurable blue LED indicator.
− Indicator ON or OFF when power ON, or
− Indicator ON or OFF when power OFF.
• Configurable Switch Mode.
− Power ON during timing (NO - Normally Open), or
− Power OFF during timing (NC - Normally Closed).
• Suitable for a wide range of load types, including motor loads up to 8A.
• Compatible with HPM and Clipsal style wall plates with push buttons provided for a perfect fit.
• Very low 80mW standby power.
• Remote switch compatible.
• Timer set to 30 minutes out of box.

2. OPERATING CONDITIONS

• Operating Voltage:
• Operating Temperature:
• Compliance Standard:
• Maximum Load:
• Timer Range:
• Timer Accuracy:
3. LOAD COMPATIBILITY
Incandescent
240V Halogen
Fluorescent Tube with electronic ballast
Fluorescent Tube with iron core ballast
Compact Fluorescent
Electronic Transformer
LED
Wirewound Transformer
Fan Motors
Heating Elements
Note: Operation at temperature, voltage or load outside of the above specifications may cause permanent
damage to the unit.
Note: This manual was correct at the time of manufacture. For the latest version of the manual and any technical or
safety updates refer to the website:- cabac.com.au, cabac.co.nz or scan the QR code with a mobile phone.
Customer Care Australia P: 133 122 F: 1300 303 310 E: sales@cabac.com.au W:cabac.com.au
A: Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 0800 966 969 F: 0088 6969 E: sales@cabac.co.nz W: cabac.co.nz
ADVANCED WALL TIMER SWITCH MANUAL
230 – 240V a.c. 50Hz
0 to +50 °C
CISPR15, AS/NZS 3100
10AX
10 seconds to 15 hours
±0.5%
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
3-WIRE
SUITABLE FOR FANS,
MOTORS OR IRON
CORE BALLASTS
CP13944 Rev 1, 19 MARCH, 2014
1