Table of Contents
Advertisement
CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. DC Mode fan connectors control fan speed by changing voltage.
This motherboard can automatically detect PWM and DC mode. However, you can
follow the instruction below to adjust the fan connector to PWM or DC Mode manually.
Switching fan mode and adjusting fan speed
You can switch fan modes and adjust fan speed in BIOS > HARDWARE MONITOR.
Select PWM mode, DC mode or Auto detection mode
Important
Make sure fans are working properly after switching the PWM/ DC mode.
Pin definition of fan connectors
PWM Mode pin definition
1
Ground
3
Sense
44
Overview of Components
Automatically detect mode fan connectors
CPU_FAN1/PUMP_FAN1/ SYS_FAN1/ SYS_FAN2/ SYS_FAN3
There are gradient points of the fan speed that allow you to adjust
fan speed in relation to CPU temperature.
2
+12V
4
Speed Control Signal
1
1
SYS_FAN4
DC Mode pin definition
1
Ground
2
3
Sense
4
Voltage Control
NC
Advertisement
Table of Contents
