Table of Contents
Advertisement
Loading/Ejecting a Floppy Disk
This item explains how to load and eject floppy disks.
Loading
Insert into the floppy disk drive.
Label
Insert the floppy disk with the label upwards
and the shutter side first until the EJECT
button springs out.
Critical Point
If you eject the floppy disk while the floppy
disk unit's access indicator is still on, there
is a risk of losing the data on the disk.
When you do not want to erase the data
saved on the disk, or when you do not want
to write additional data, slide the floppy
disk's write protector so that the hole is
open (WRITE PROTECT state). When you
want to write data again, slide the write
protector so that the hole is closed.
56
Ejecting
Access lamp
Check that the floppy disk unit's access lamp
is out, then press the EJECT button.
Write protector
WRITE
WRITE
ENABLE
PROTECT
EJECT button
Advertisement
Table of Contents
