Table of Contents
Advertisement
Resuming
You can make the computer resume the current application program, using either the SUS/RES
button or the closed cover switch.
Critical Point
Immediately after putting it into the Suspend mode, do not make the computer resume the
program but wait for 10 seconds or so.
Using the SUS/RES button
1
Press the SUS/RES button.
Pressing the SUS/RES button will cause
the indicator
panel to stop blinking and light up
permanently, and will bring the computer
into operation.
Critical Point
Do not hold down the SUS/RES button for more than 4 seconds, otherwise the computer will
be turned off.
Using the closed cover switch
1
Open the LCD display.
Opening the LCD display will turn on the
Cover Close switch and make the
computer resume the current program.
Critical Point
The Resume function does not operate if Lid Open Resume in the BIOS Setup dialog box is
not selected.
on the status display
SUS/RES
Latch
19
Advertisement
Table of Contents
