Inserting The Battery And Memory Card - Nikon KEYMISSION 170 Reference Manual

Inserting the Battery and Memory Card

Unlock the battery-chamber/memory card slot cover latch release (1), slide the
battery-chamber/memory card slot cover latch to the y position (2), and open
the battery-chamber/memory card slot cover towards you (3).
With the battery's positive and negative terminals oriented correctly, move the
orange battery latch (4), and fully insert the battery (5).
Slide the memory card in until it clicks into place (6).
Be careful not to insert the battery or memory card upside-down or backward, as
this could cause a malfunction or result in damage to the camera or memory card.
After closing the cover (7), slide the battery-chamber/memory card slot cover
latch to the z position (8), and return the battery-chamber/memory card slot
cover latch release to the LOCK position (9). Make sure that the orange marks on
both latches are not visible.
B
Notes About Waterproof and Dustproof Performance
See "Notes About Shockproof, Waterproof, and Dustproof Performance" (Axiii) for more
information.
B
Formatting a Memory Card
The first time you insert a memory card that has been used in another device into this
camera, make sure to format it with this camera.
Note that formatting a memory card permanently deletes all images and other
data on the memory card. Be sure to make copies of any images you wish to keep
before formatting the memory card.
Insert the memory card into the camera, and select Format card in Camera settings
(A58) in the c (setup) menu.
Getting Started
Inserting the Battery and Memory Card
7