Table of Contents
Advertisement
OPERATING INSTRUCTIONS
A
B
8
Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
NOTE: Before using the tool,
read the instruction book
carefully.
INTENDED USE
The machine is intended for dry
sanding of wood,plastic, metal and
filler material as well as painted
surfaces.
Machines with electronic control are
also suitable for polishing.
1. CHANGING HOOK & LOOP
SANDPAPER (See A, B)
The sandpaper and sanding plate
are provided with a hook and loop
attachment system to allow quick
and easy changing of the sanding
and polishing accessories. Firstly,
remove any dust or other objects
from the hook and loop on the
sanding plate and sandpaper. As
the sandpaper has dust extraction
holes you must align these with the
holes in the sanding plate, otherwise
the dust extraction will not function.
(See A)
To remove the sandpaper, lift one
corner of the paper and pull off from
the sanding plate. (See B)
Advertisement
Table of Contents
