Specifications; Environmental Specifications; D3940 Storage Module Specifications - HPE Synergy 12Gb SAS Storage Maintenance And Service Manual

Specifications

Environmental specifications

Specification
Temperature range
Operating
Non-operating
Short-term
Wet bulb temperature
Operating
Nonoperating
Relative humidity
(noncondensing)
Operating
Nonoperating
Power requirement
Minimum
Maximum
1 All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1000 ft) to 3048
m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048 m (10,000 ft) or 70 Kpa/10.1 psia.
Upper nonoperating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia.
2 Storage maximum humidity of 90% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.

D3940 Storage Module specifications

Specification
Data path
Drive type
Drive form factor
Height
Depth
Width
Weight (maximum)
Weight (no drives installed)
*Approximate maximum weight. Specific maximum weight depends on the SFF drive manufacturer.
Value
1
10°C to 35°C (50°F to 95°F)
-30°C to 60°C (-22°F to 140°F)
-5°C to 50°C (23°F to 122°F)
28ºC (82.4ºF)
38.7ºC (101.7ºF)
2
20% to 80%
5% to 95%
3 watts
40 watts
Value
12Gb/s SAS x8 to 2 interconnect
bays
•
SAS SSD
•
SAS HDD
•
SATA SSD
•
SATA HDD
SFF SmartDrive
21.59 cm (8.5 in)
60.96 cm (24 in)
12.7 cm (5 in)
21.3 kg (47 lb)*
10.0 kg (22.0 lb)
Specifications 34