When you set "Enlarging" or
"S-Log Disp. Assist ON/OFF" to
ON, the small icon is displayed.
• When the preview is displayed,
small icon is not changed.
• Depending on the enlarging
setting (Page 18), the "×1.3" small
icon is displayed even when the
image is enlarged by ×3/×6.
Turn off the power to this unit.
Turn on the power to this unit
while pressing and holding the
center of the ZOOM/SELECT
Turn on the
This function displays the whole
image in black and white and the
focused parts in color. This makes
it easier to check which parts are
actually in focus whatever the
Register [PEAK] in the C1
button or C2 button of this
In the default setting, [PEAK] is
registered in C1 button.
If [PEAK] is not registered,
register it by pressing
[Advanced settings] [C1] or
[C2] (Page 22).