Specifications - Kenwood TK-8150 Service Manual

GENERAL
Frequency Range ............................................ 450~500MHz (K)
Number of Channels (Zone) ............................ Conventional CH : Max.128 (1 zone x 128ch~128 zones x 1ch)
Channel Spacing .............................................. Wide : 25kHz
Operating Voltage ........................................... 13.6V DC± 15%
Current Drain ................................................... Standby : 0.5A
Duty Cycle ....................................................... Transmit : 20%
Operating Temperature range ......................... –22ºF~+140ºF (–30ºC~+60ºC)
Frequency Stability (–22ºF~+140ºF) ................ ± 0.00025%
Antenna Impedance ........................................ 50Ω
Dimensions (W x H x D) .................................. 7-1/12" x 2" x 7" (180mm x 50mm x 170mm)
Weight (net) .................................................... 5.9 lbs (2.7kg)
Band Spread .................................................... 50MHz
RECEIVER
Sensitivity ........................................................ 12dB SINAD : 0.35µV
Selectivity ........................................................ Wide : 80dB (± 25kHz)
Intermodulation ............................................... Wide : 79dB (± 25, 50kHz)
Spurious Response ......................................... 85dB
External Audio Output ..................................... 12W (@4Ω 3% distortion), 13W (@4Ω 5% distortion)
Internal Audio Output ...................................... 3.2W (@16Ω 3% distortion), 3.5W (@16Ω 5% distortion)
TRANSMITTER
RF Output Power ............................................ 45 to 15 watts
Type of Emission ............................................. Wide : 16K0F3E, 20K0F1D
Spurious Response ......................................... 75dB
FM Hum & Noise ............................................ Wide : 48dB
Microphone Impedance .................................. 600Ω
Audio Distortion .............................................. Less than 1% at 1000Hz
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
FleetSync™ is a trademark of Kenwood Corporation.
Applicable MIL-STD
Standard
Low Pressure
High Temperature
Low Temperature
Temperature Shock
Solar Radiation
Rain
Humidity
Salt Fog
Dust
Vibration
Shock
fineline6

SPECIFICATIONS

MIL 810C
Methods/Procedures Methods/Procedures
500.1/Procedure I 500.2/Procedure I, II
501.1/Procedure I, II 501.2/Procedure I, II Cat. A1
502.1/Procedure I 502.2/Procedure I, II Cat. C1
503.1/Procedure I 503.2/Procedure I Cat. A1,C1
505.1/Procedure I 505.2/Procedure I
506.1/Procedure II 506.2/Procedure II
507.1/Procedure II 507.2/Procedure II
509.1/Procedure I 509.2/Procedure I
510.1/Procedure I 510.2/Procedure I
514.2/Procedure VIII, X 514.3/Procedure I Cat. 8
516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V
Trunking ID : Max. 250/zone (max. 32 zones)
Narrow : 12.5kHz
Receive : 2.3A
20dB Quieting : 0.45µV
Narrow : 73dB (± 12.5kHz)
High : 45 watts
Narrow : 42dB
MIL 810D
Methods/Procedures
500.3/Procedure I, II
501.3/Procedure I, II Cat. A1
502.3/Procedure I, II Cat. C1
503.3/Procedure I Cat. A1,C1
505.3/Procedure I
506.3/Procedure II
507.3/Procedure II
509.3/Procedure I
510.3/Procedure I
514.4/Procedure I Cat. 8
516.4/Procedure I, IV, V
TK-8150
Transmit : Less than 13A
Narrow : 73dB (± 12.5, 25kHz)
Low : 15 watts
Narrow : 11K0F3E, 11K2F1D
MIL 810E MIL 810F
Methods/Procedures
500.4/Procedure I, II
501.4/Procedure I, II
502.4/Procedure I, II
503.4/Procedure I, II
505.4/Procedure I
506.4/Procedure III
507.4
509.4
510.4/Procedure I, III
514.5/Procedure I Cat. 20
516.5/Procedure I, IV, V
69