Download Print this page

Toua GFN3490CH Safety Operating Manual

Gas framing nailer
Hide thumbs Also See for GFN3490CH:

Advertisement

MOD
: GFN3490CH
GAS FRAMING NAILER
SAFETY OPERATE MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the GFN3490CH and is the answer not in the manual?

Questions and answers

Summary of Contents for Toua GFN3490CH

  • Page 1 : GFN3490CH GAS FRAMING NAILER SAFETY OPERATE MANUAL...
  • Page 2: Table Of Contents

    CONTENTS ITEM PAGE ....... SAFETY ......2. SPECIFICATION ..3. GENERAL OPERATION MANUAL ......4. MAINTENANCE 5. EXPLODED DRAWING AND PARTS LIST...
  • Page 3: Safety

    SAFETY IMPORTANT INFORMATION MUST TO KNOW BEFORE TO READ IMPORTANT SAFETY INSTRUCTIONS FOR Read and understand tool labels USING NAILERS and all of operating instructions, READ ALL INSTRUCTIONS safety precautions and warnings in This Nailer is powered by internal this manual before operating or combustion device.
  • Page 4 Keep the Nailer, fuel cells and battery 9. STORE NAILER PROPERLY WITH FUEL CELL a way fr o m su n sh in e and from 120°F MAX AND BATTERY REMOVED. ℃ (50 ) tem pe r atu r e e xce eding 120°F When not in use, the Nailer, fuel cell and battery (50°C).
  • Page 5 17. PLACE NAILER PROPERLY ON WORKPIECE. Do not operate the Nailer when you are tired. Do not drive fasteners on top of other fasteners The Nailer should never be used by you if you or with the Nailer at too steep of an angle; the are under the influence of alcohol, drugs or fasteners can ricochet and hurt someone.
  • Page 6 FUEL CELL IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER DANGER WARNING ■ Fuel cell, fuel and propellant are flammable under pressure. Death or serious bodily injury could result from Explosion / Fire Hazard improper or unsafe use of battery chargers. M ust to follow a ll in structions To avoid these risks, follow these basic safety otherwise may result in fire and...
  • Page 7 Table 1 3. DO NOT short-circuit the battery. RECOMMENDED MINIMUM AWG SIZE FOR 4. DO NOT insert any objects into the battery EXTENSION CORDS FOR BATTERY CHARGERS charger's air vents. Electric shock or AC Input Rating Amperes AWG Size of Cord damage to the battery charger may result.
  • Page 8: Specification

    SPECIFICATION 1 . GAS FRAMING NAILER TYPE GFN3490CH GFN3490CH -A Type of power Piston reciprocating Applicable nails See 2. Available Nails. Nail Capacity 48 nails -5 ℃ ~ 50℃(23℉to 120℉) Ambient temperature 13.31 " 14.88" 4.21" 13.31" 15.12" 4.21" (L)×...
  • Page 9: General Operation Manual

    The information contained in this Manual is designed to assist you in the safe operation of the Nailer. Some illustrations in this Manual may show details or attachments that differ from those on your own Nailer. NAME OF PARTS 1. Gas Framing Nailer ( Model: GFN3490CH GFN3490CH- A) Cell Cover Latch Fuel Cell...
  • Page 10 4. Accessories 1. How to install the battery Align the battery with the groove in tool handle and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.
  • Page 11 NOTE: The battery charging time becomes longer ■ If the battery charger does not work while the when a temperature is low or the voltage of battery is mounted correctly, it is probable that the power source is too low. the battery or charger is malfunctioning.
  • Page 12 ■ Do not spray to a naked flame or TESTING THE NAILER any incandescent material. DANGER ■ Do not smoke when handling Operators and others in work area fuel cell. MUST wear safety glasses with ■ Keep stem of fuel cell away from side shields which conforms to face or skin.
  • Page 13 (2) Installing the battery. ③ Insert the stem of fuel cell into the hole of adaptor. Handle Battery Pack Stem Adapter Fuel Cell Do not operate the push lever or trigger while installing the battery. Make sure the battery indicator light is flashing green. Stem If the battery indicator light is flashing red, the battery doesn't have enough power and it needs to be charged.
  • Page 14 (3) Pull the nail feeder back to engage the feeder Depress the push lever against the workpiece, knob to the nail strip. downward nailer, pull the trigger. Feeder Knob Pull the trigger Nail Feeder ■ THE NAILER MUST OPERATE. NOTE: (7) If no abnormal operation is observed, you may ■...
  • Page 15 ■ Do not use Nailer as hammer. NAILER OPERATION ■ Disconnect battery and fuel cell from Nailer Read section titled “SAFETY”. when: it is not in use; DANGER leaving work area; ■ Operators and others in work moving it to another location; area MUST wear safety glasses handing it to another person.
  • Page 16 (3) Remove the fuel cell and the battery. (1) Position the nail outlet on the workpiece with (4) Stop moving the push lever when a suitable position finger off the trigger. is reached for a nailing test. (2) Depress the push lever firmly until it is completely (5) Connect the fuel cell and the battery to the Nailer.
  • Page 17: Maintenance

    MAINTENANCE (4) Remove the jam nail. NOTE: ■ The information contained in this Manual is designed to assist you in the safe maintenance of the Nailer. ■ Some illustrations in this Manual may show details or attachments that differ from those on your own Nailer.
  • Page 18 ■ When not in use, the Nailer, fuel cell and battery Cleaning time intervals form should be stored in a warm and dry place. Operation Environment very dirty dirty common clean ■ Keep it out of reach of children. 1000 1 Week 2 Week 1Month...
  • Page 19 Chart Operator troubleshooting CORRECTION PROBLEM MCHECK METHOD Clear a jam nails. Check for a jam nails. Clean and lubricate. Check function of nail feeder. Clear a jam. Check for a jam. Use only recommended nails. Check for proper nails. Nailer operates, Ribbon spring weakened or damaged? Replace ribbon spring.
  • Page 20: Exploded Drawing And Parts List

    EXPLODED DRAWING AND PARTS LIST EXPLODED DRAWING MODEL: GFN3490CH GFN3490CH -A 502-1 502-2 Notes: Torque(Nm) Item Remark 1~1.2    Loctitle277 1.8~2      Loctitle277 3~3.5 3.5~4 Loctitle277 5.5~6 Loctitle272...
  • Page 21 PART LIST Note: consumable parts MODEL: GFN3490CH GFN3490CH-A Parts Name Remark Parts Name Remark Hex Bolt M5×10 Hex.Socket HD.Bolt M5×12 Top Cover Plate Sleeve Filter Side Plate Abnormity Lockunt Filter Cover Retaining Ring d0=24 Push Lever Assembly Hex.Bolt Stop Pin...

This manual is also suitable for:

Gfn3490ch-a