Advertisement
•
To retract the trimmer, slide the trimmer release button down and push the
back of the trimmer head downwards until it locks into place.
E TIPS FOR BEST RESULTS
•
Always hold the shaver at right angles to the skin so that all foils are
touching the skin with equal pressure.
•
Use moderate to slow stroking movements. The use of short circular
motions in stubborn areas may obtain a closer shave, especially along the
neck and chin line.
•
DO NOT press hard against the skin in order to avoid damage to the foil
heads.
, Note: your shaver has been designed to be used in the shower if desired.
C CARE FOR YOUR SHAVER
•
Care for your appliance to ensure a long lasting performance.
•
We recommend you clean your product after each use.
•
The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
•
Keep the switch in the "off" position when not in use.
, CLEANING CAUTIONS
•
Remove the foil assembly by pressing the release buttons on either side of
the head and lifting the foil assembly upwards to remove from the hair
pocket.
•
Tap out the excess hair shavings and rinse the foils under running water.
•
Do not clean the shaving foil with a brush.
•
Replace the head assembly by placing the assembly on top of the hair
pocket, press down and click into place.
, CLEANING TRIMMER
•
Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.
, REPLACING THE FOILS & CUTTERS
•
To ensure continued high quality performance from your shaver, we
recommend the foils and cutters are replaced every six months.
, Signs that your foils and cutters need replacing.
•
Irritation: as foils get worn, you may experience skin irritation.
5
Advertisement
