Indications Of Led And Beeper - Chevrolet BEAT LPG Owner's Manual

Hide thumbs Also See for BEAT LPG:
Table of Contents

Advertisement

Indicatons of LED and Beeper
The LED's on the fuel selection switch indicates the level of
gas in the Tank. There are six different types of indication of
LED,
Sl.
Quantity of LPG in
No.
Tank (%)
1.
100% (Full tank) (26.2 L )
2.
80% (21 L)
3.
63% (16.5 L)
4.
48% (12.5 L)
5.
32% (8.5 L)
6.
15% (4 L) Reserve
 
LED indication on
Fuel selection switch
4 LED's BLINKING
4 LED'S GLOWING
3 LED'S GLOWING
2 LED'S GLOWING
1 LED GLOWING
1 LED BLINKING
Beeper indication
Your vehicle is also installed with a beeper which is integrated
part of Fuel selection switch. This beeper has two different
sound patterns which indicate as follows:
1. AUTOMATIC CHANGEOVER ON PETROL [FROM
LPG MODE] WHILE THE LPG GETS EMPTY
When the auto LPG is over - the fuel mode will automatically
change over to petrol. A buzzer will begin to beep every 1
second to indicate this automatic changeover to petrol mode.
The driver needs to acknowledge this by pressing the fuel
selection switch and buzzer will stop beeping.
2. DIAGNOSTIC ERRORS
Whenever there is a diagnostic error the buzzer will make 3
beeps every 20 seconds. At this point please press the fuel
selection switch to change over to petrol mode. Please
check/repair your vehicle at your nearest Chevrolet
authorized service outlet.
Note
Level indication of LPG
fuel in tank is for basic
reference only. It does not
show exact quantity of
LPG.
~ 10 ~
Note
Domestic LPG filling or use in
vehicle is illegal.
Use of Domestic LPG will void the
warranty of vehicle.
Use of Domestic LPG is
dangerous, it maybe damage
multivalve safety device (e.g. 80%
cutoff, PRV etc.).
The use of Domestic LPG in
vehicle will damage all LPG
components and engine also.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents