Advertisement
Content
Connections
Aufstellung
- Preamplifier
- Stereofonie
- Signal Cable
- Balance
- Current Cable
- Symmetrie
- On-/Off
- Stability
- Stereo
- Balance
- Acoustical Symmetry
- On Wall - Free Space
- Listening Angle
- Speaker Axis
- Direct Sound - First Reflections
- Placement Examples
- 2-way Active System
- Overload Protection
- Level
- Electronics Scheme
- Phase Linearity
- Spaciousness
- Level
- Impulse Behaviour
Tecnical Data
Warranty
Please read this Manual before unpacking and installing the speakers, especially the chapters Connections
and Safety Instructions.
Speakers should be unpacked, installed and moved always by 2 persons. Place the speakers with the back
(grey side) on a soft surface. Then you can fix the the base plate with the screws which are packed by. First
screw all of them loose and then screw them tight. Then turn the speakers in the vertical position by placing
them on the rear edge of the base plate. When you move the speakers in another position, always place
them carefully first on the rear edge of the base plate. The other edges could be too weak.
© by KLANGWERK GmbH, Zürich, Switzerland
1
2
3
4
5
6
7
8
9
Advertisement
