Lexus LX570 Owner's Manual page 131

CHANGING VIEWING
ANGLE OF 3D MAP
1
Display the "Detailed Navi. Settings"
screen.
(→P.128)
2
Select "3D Map Viewing Angle".
3
Select "Up" or "Down" to change the
viewing angle.
"Default": Select to set the initial angle.
CURRENT POSITION/TIRE
CHANGE CALIBRATION
The current position mark can be adjust-
ed manually. Miscalculation of the dis-
tance caused by tire replacement can
also be adjusted.
1
Display the "Detailed Navi. Settings"
screen.
(→P.128)
2
Select "Calibration".
3
Select the desired item.
 For additional information on the accu-
racy of a current position: →P.135
■ POSITION/DIRECTION
BRATION
When driving, the current position mark
will be automatically corrected by GPS
signals. If GPS reception is poor due to
location, the current position mark can
be adjusted manually.
1
Select "Position / Direction".
2
Scroll the map to the desired point
( P.79) and select "OK".
→
3
Select an arrow to adjust the direction of
the current position mark and select
"OK".
LX570_Navi_OM60P47U_(U)
16.05.31 17:44
5. SETUP
3
CALI-
131