Samsung PPM63M7FS Service Manual page 44

■ White Balance
Adjust spec.
1. Source: DVI
2. Setting Mode: 1920*1080@60hz
3. Pattern: Pattern #92
4. use equipment: MIk-7256 (MSPg925l)
5. Work order
1 Connect DVI output terminal of MIk-7256 (MSPg925l) to the hDMI input in main set
2 Set the input to DVI mode
3 Enter the white Balance menu of service mode
4 Contact CA-210 sensor to glass filter
5 Adjust the low light
-adjust Sub-Bright (lBe) to set the 'Y' value
-adjust r-Offset ('x') and B-Offset ('y') to the color coordinates.
* Do not adjust g-Offset data
6 Adjust the high light.
-adjust r-gain ('x') and B-gain ('y') to the color coordinates.
* Do not adjust the g-gain data, Sub-Contrast data.
Samsung Electronics
( SAMSuNg whITE BALANCE Adjustment PATTERN with FPD )
( fixed Position of Ca210 Probe )
Troubleshooting
4-23