iHome iBT85 Instruction Manual page 6

3. To review the charging status of the unit while it is charging, press and hold the
Color Mode Button. The cabinet lights will flash green from bottom to top for 5
seconds to show unit is charging.
Reviewing Battery Charge Level (Charger is Disconnected and unit is
ON)
1. Press and hold the
USB cable not connected) to enter Battery Review Mode. The cabinet lights will
blink and built-in voice will announce the current battery level.
Charging Devices Via USB Out Port (Charger is Disconnected and
unit is ON)
NOTE: The iBT85 will only charge devices when operating on the internal battery (when
NOT connected to power source via the USB POWER IN port).The unit must be
powered ON to charge devices via the USB Out Port. To charge devices via USB while
operating on the internal battery, we recommend that the unit be fully charged first.
The iBT85 will not charge external devices via USB when internal rechargeable
battery is too low (red indicator is blinking). To save battery power, USB charging is
limited to 1 hour when no audio is playing.
1. Lift splashproof cover on the back of the unit to expose the USB Out Port.
2. Connect the standard size end of a USB cable (not included) to the USB Out Port and
connect the other end to the charging port on your device.
3. Press and hold the Power On/O Button for 2 seconds to turn the unit ON.
4. Some devices require more power than the 1 Amp the USB Out Port provides. Monitor the
charging progress on your device. If your device does not charge, use the charger that
came with it.
Color Mode Button when unit is ON but not charging (micro
4