Hitachi HT-4139-28 Troubleshooting Manual page 43

Troubleshooting
Table 2.2 Error Code (Host)
Code Detail Cause
80G0A201 Sheet information combination check
-
error has occurred.
00041801 Barcode recognition image specification
combination error
00041802 Barcode recognition image type
combination error
00041803 Barcode recognition count combination
error
00041901 Window width paper size combination
error (Width)
00041A01 Non-sequence scanning ejection
information specification error
00041B01 Check image combination error (Standard
image)
00041B02 Check image combination error (Form
check image)
00041B03 Check image combination error (Barcode
recognition image)
00041B04 Check image combination error (Printable
check image)
00041B05 Check image combination error
(Anti-double-scan printing check 1 image)
00041B06 Check image combination error
(Anti-double-scan printing check 2 image)
00041B11 Another image using image combination
error
00041B12 Read only image combination error
00041B13 Read only image reference ahead
combination error
00041B14 Thin paper specification combination error
00041B15 Recognition check flag combination error
00041B16 Recognition check flag and Four-point
detection used Color Flg combination
error
00041C01 Four-point detection used Color Flg
matching error
00041F01 Patchcode recognition image
specification combination error
00041F02 Patchcode recognition image type
combination error
00041F03 Check image combination
error(Patchcode recognition image)
2-32
(21/29)
Recovery
-
Check image setting again
If not recovered, get dump
information (refer to 1.4) and
contact Hitachi.
Check sheet setting again.
Refer to Appendix of this
manual: A-4 Notes for sheet
check.
If not recovered, get dump
information (refer to 1.4) and
contact Hitachi.
Check feed setting again.
Check image setting again
If not recovered, get dump
information (refer to 1.4) and
contact Hitachi.
Check recognition setting
again.
If not recovered, get dump
information (refer to 1.4) and
contact Hitachi.