Hitachi HT-4139-28 Troubleshooting Manual page 16

Table Scanner Error Code (5/11)
No. Error code Cause
33124920 Imprinting does not work.
42
331261XX Paper jam at hopper area
43
Recovery
Check parameter for imprint is correct.
If not recovered, get dump information
(refer to 1.4) and contact Hitachi.
1. Check the paper setting by the custmor.
if the papers don't set properly, this error will
occur.
2. Check following parts.
#1 Pick Roller
#2 Separator Roller
#3 Reverse Roller, #29 Reverse Roller
ASSY
#101 Torque Limiter
#5 Separator Clutch
#66 Soft Absorber
3. Check PC21/PC22/PC31 Detector
information using Maintenance Tools.
Clean PC21/PC22/PC31 Detector, then run
Procedure of Auto Calibration.
If not recovered, replace following parts.
#23 DRV PK-ASSY
#24/25 MAIN PK-ASSY (28 or 48)
PC21/PC22/PC31 Detection Unit
4. Check the Main Motor movement using
Maintenance Tools.
If the Main Motor doesn't move property,
replace following parts.
#41 Stepping Motor (Main Motor)
Troubleshooting
2-5