Honda Acura NSX 2017 Owner's Manual page 140

■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory Buttons
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat and the door mirrors to the
desired position.
2. Press the SET button.
u You will hear the beep, and the memory
button indicator light will blink.
3. Press memory button ( 1 or
seconds of pressing the SET button.
u Once the seat and the outside mirrors
position have been memorized, the
indicator light on the button you pressed
stays on.
1. Change to P . (
2. Apply the parking brake.
3. Press a memory button ( ( 1 or
u You will hear the beep, and the indicator
light will blink.
The seat and the door mirrors will
automatically move to the memorized
positions. When it has finished moving, you
will hear the beep, and the indicator light
stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat or the outside mirror position
before the double-beep.
•
You set the power mode to any position except
ON.
( 2 within five
1Recalling the Stored Position
The seat and door mirrors will stop moving if you:
•
Press the SET button, or a memory button (
).
( 2
( 2 ). •
Adjust the seat position or door mirrors.
•
Shift into a position other than
*
or
( 1
.
P (
139