Power System Won't Start; Checking The Procedure - Honda Acura NSX 2017 Owner's Manual

Power System Won't Start

Checking the Procedure

When the READY indicator does not come on and the Ready To Drive message
does not appear on the driver information interface, check the following items and
take appropriate action.
Checklist
Check if the related The Temperature Is Too Cold For Vehicle To Operate
indicator or driver message appears.
information interface
The To Start, Hold Remote Near Start Button message
messages come on.
appears.
uMake sure the keyless access remote is in its operating range.
2 ENGINE START/STOP Button Operating Range P. 127
The POWER SYSTEM indicator comes on.
The transmission system indicator blinks and Transmission
Problem Apply Parking Brake When Parked message
appears.
Check the brightness The interior lights are dim or do not come on at all.
of the interior lights.
The interior lights come on normally.
Check the gear The transmission is not in
position.
Check the When the immobilizer system indicator is blinking, the power
immobilizer system system cannot be turned on.
indicator.
Condition
P .
(
1Checking the Procedure
If you must start the vehicle immediately, use an
assisting vehicle to jump start it.
2 Jump Starting P. 434
What to Do
2 Driver Information Interface Warning and
Information Messages P. 83
2 If the Keyless Access Remote Battery is
Weak P. 432
Have your vehicle checked by an authorized
Acura NSX dealer.
The power system can be activated as a
temporary measure.
2 If the Transmission System Indicator Blinks
along with the Warning Message P. 442
Have the 12-volt battery checked by an
authorized Acura NSX dealer.
Check all fuses, or have your vehicle checked by
an authorized Acura NSX dealer.
2 Inspecting and Changing Fuses P. 447
Change the gear position to
2 Immobilizer System Indicator P. 81
P .
(
431