Replacing The Graphics Card; Procedure; Post-Requisites - Dell Alienware X51 R3 Service Manual

Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.

Replacing the graphics card

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the graphics-card assembly with the slot on the riser cage.
2 Place the graphics-card assembly in the slot and press down firmly. Ensure that
the graphics-card assembly is seated in the slot.
3 Rotate the card retention bracket towards the riser cage until it snaps into place.
4 Route the graphics-card power cables through the routing guide on the riser
cage.
5 Align and press down the riser cage until the riser card slides into the riser-card
slot on the chassis.
6 Replace the screws that secure the riser cage to the chassis.

Post-requisites

Replace the side
computer. After working inside your computer, follow
After working inside your
panel.
computer. For more safety best
www.dell.com/
Before
37