Cd Player Cd/Md Unit (Optional); Playing A Disc - Sony CDX-MP30 Operating Instruction

CD Player
CD/MD Unit (optional)
In addition to playing a CD with this unit
alone, you can also control external CD/MD
units.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.

Playing a disc

(with this unit)
Insert the disc (labelled side up).
Playback starts automatically.
If a disc is already inserted, press (SOURCE)
repeatedly until "CD" appears to start
playback.
To Do this
Press (OFF).
Stop playback
Eject the disc Press Z.
Skip tracks Turn the SEEK/AMS
– Automatic control dial.
Music Sensor [once for each track]
Fast-forward/ Turn the SEEK/AMS
reverse control dial.
– Manual Search [hold to desired point]
Skip albums* 1 Press (5) (ALBUM –) or
– Album selection (6) (ALBUM +).
1 Available only when an MP3 file is played.
*
To skip tracks continuously, turn once the
SEEK/AMS control dial, then turn again
within 1 second and hold.
Notes
• Depending on the recording method used on the
disc, it may take a minute or more before playing
the first track.
• Depending on the condition of the disc, it may
not play back (page 7).
• While the first/last track on the disc is playing, if
the SEEK/AMS control dial is turned, playback
skips to the last/first track of the disc.
• When the last track on the disc is over, playback
restarts from the first track of the disc.
• With optional units connected, playback of the
same source will continue on to the optional CD/
MD unit.
• If you can play a high-bit rate MP3 file such as
320 kbps, sound may be intermittent.
(with optional unit)
1
Press (SOURCE) repeatedly to select
"CD" or "MD (MS*
2
Press (MODE) repeatedly until the
desired unit appears.
Playback starts.
2
MS: MG Memory Stick System-up Player MGS-
*
X1.
To Press
Skip discs ( 1 ) (DISC –) or
– Disc selection ( 2 ) (DISC +)
Skip albums* 3 ( 5 ) (ALBUM –) or
– Album selection ( 6 ) (ALBUM +)
3
* Available only when an MP3 file is played.
Cautions when connecting MGS-X1 and MD unit(s)
This unit recognizes MGS-X1 as an MD unit.
• When you want to play MGS-X1, press (SOURCE)
to select "MS" or "MD." If "MS" appears in the
source display, MGS-X1 starts to play. If "MD"
appears in the source display, press (MODE) to
select "MS," to start playback.
• When you want to play an MD unit, press
(SOURCE) to select "MD" or "MS." If your
desired MD unit appears in the source display, it
starts to play. If "MS" or another MD unit
appears in the source display, press (MODE) to
select your desired MD unit, to start playback.
2 )."
11