Table of Contents
Advertisement
Chapter 7. Playback Settings
Pre-amp. This allows you to adjust the volume when replaygain is applied. Replaygain
often lowers the volume, sometimes quite much, so here you can compensate for
that. Please note that a (large) positive pre-amp setting can cause clipping, unless
prevent clipping is enabled. The pre-amp can be set to any decibel (dB) value
between -12 dB and +12 dB, in increments of 0.5 dB.
7.10. Track Skip Beep
Controls the volume of the beep that is heard when skipping forward or backward be-
tween tracks. The beep is disabled when set to Off.
7.11. Auto-Change Directory
Control what Rockbox does when it reaches the end of a directory. If Auto-Change Di-
rectory is set to Yes, Rockbox will continue to the next directory. If Auto-Change
Directory is set to No, playback will stop at the end of the current playlist. Using
the Random feature requires you to first generate a folder list via the Random Folder
Advance Configuration plugin (see section
Note: You must have the Repeat option set to No for Auto-Change Directory to
function properly.
Note: This feature only works when songs have been played from the file browser. Using
it with the database may cause unexpected behaviour.
7.12. Constrain Auto-Change
If enabled and you have set Start File Browser Here to a directory other than root,
Auto-Change Directory will be constrained to the directory you have chosen and
those below it. See section
7.13. Pause on Headphone Unplug
Enables and disables automatic pausing of playback when the headphones are discon-
nected from the player's headphone socket.
Pause on Headphone Unplug. Options for automatic pause:
Off. Disables automatic pause.
Pause. Pauses the player when the headphones are removed.
Pause and Resume. Pauses when the headphones are removed, and resumes play-
back when they are reconnected.
The Rockbox manual
11.4.18
4.1.2
(page 26).
(version 3.14)
(page 181)).
Toshiba Gigabeat F and X Series
61
Advertisement
Table of Contents
