Toshiba Gigabeat F Manual page 193

Chapter 12. Advanced Topics
Viewport Declaration Syntax
%V(x,y,[width],[height],[font]) %Vf([fgcolour]) %Vb([bgcolour]) %Vg(start,
end [,text])
%Vf and %Vb set the foreground and background colours respectively.
'fgcolour' and 'bgcolour' are 6-digit RGB888 colours, e.g. FF00FF.
%Vg defines a gradient fill that can then be used with the %Vs tag. 'start' and
'end' set the initial and final colours, and the optional 'text' sets the text colour.
Colours are 6-digit RGB888, e.g. FF00FF.
'font' is a number: 0 is the built-in system font, 1 is the current menu font, and
2-9 are additional skin loaded fonts (see section
Only the coordinates have to be specified. Leaving the other definitions blank will
set them to their default values.
Note: The correct number of commas with hyphens in blank fields are still needed.
%V(12,20,-,-,1) %Vf(000000) %Vb(FFFFFF) %Vg(FFC0CB, FF0000, FFFF00)
%sThis viewport is displayed permanently. It starts 12px from the left and
%s20px from the top of the screen, and fills the rest of the screen from
%sthat point. The lines will scroll if this text does not fit in the viewport.
%sThe user font is used, and the foreground and background are set to black
%sand white respectively. The line gradient is set to pink to red with yellow
%text.
Viewport definition
width/height
font
foreground/background
colours
Viewport Line Text Styles
Tag
%Vs(mode[,param])
Mode can be the following:
The Rockbox manual
Example
Description
Set the viewport text style to 'mode' from this point forward
(version 3.14)
12.2.4 (page 195)).
Default value
remaining part of screen
user defined
defined by theme
Toshiba Gigabeat F and X Series
193