Table of Contents
Advertisement
Chapter 4. Browsing and playing
4.3.2. Peak Meter
The peak meter can be displayed on the While Playing Screen and consists of several
indicators.
The bar: This is the wide horizontal bar. It represents the current volume value.
The peak indicator: This is a little vertical line at the right end of the bar. It indicates
the peak volume value that occurred recently.
The clip indicator: This is a little black block that is displayed at the very right of the
scale when an overflow occurs. It usually does not show up during normal playback
unless you play an audio file that is distorted heavily.
Note: Note that the clip detection is not very precise. Clipping might occur
without being indicated.
The scale: Between the indicators of the right and left channel there are little dots.
These dots represent important volume values. In linear mode each dot is a 10%
mark. In dBFS mode the dots represent the following values (from right to left):
0 dB, -3 dB, -6 dB, -9 dB, -12 dB, -18 dB, -24 dB, -30 dB, -40 dB, -50 dB, -60 dB.
4.3.3. The WPS Context Menu
Like the context menu for the File Browser, the WPS Context Menu allows you
quick access to some often used functions.
Playlist
The Playlist submenu allows you to view, save, search and reshuffle the current playlist.
These and other operations are detailed in section
the Playlist Viewer press Long Select while viewing the current playlist to bring
up the Playlist Viewer Menu. In this menu, you can find the Playlist Viewer
Settings.
Playlist Viewer Settings
Show Icons. This toggles display of the icon for the currently selected playlist entry and
the icon for moving a playlist entry
Show Indices. This toggles display of the line numbering for the playlist
Track Display. This toggles between filename only and full path for playlist entries
The Rockbox manual
(version 3.14)
4.4
(page 36). To change settings for
Toshiba Gigabeat F and X Series
33
Advertisement
Table of Contents
