Advertisement
2. MIDI RUNNING
NOTE ON: Receive NOTE ON signals to execute corresponding
function.
BANK
NOTE
NUMBER
Ⅰ.Select desired CHASE
Ⅱ.Press desired CHASE while holding Auto/DEL.
5. CLEAN ALL CHASE (ALL SCENES are stil availanble)
Ⅰ.Press DOWN +Auto /DEL while turning power off.
Ⅱ.Turn the power on.
RUNNING SCENES
● Turn the power on it is in MANUAL RUN mode. when in
PROGRAM mode ,press PROGRAM for 2 seconel PROGRAM LED
goes out ,it enters MANUAL mode.
● If there is not any scenes having been brogrammed in a bank, the
scene cant be run, only the SCENES having been brogrammed are
executed.
● If the fades is set to OFF ,Scene will execute channel program setting.
1. MANUAL URN
Ⅰ.Extinguish AUTO Triggered LED and MUSIC triggered LED.
Ⅱ.Select a bank (using ↑or ↓,MIDI signals through MIDI interface).
Ⅲ.Press scene to run scene.
Ⅳ.Press the SCANNER to copy to,then the SCANNER is copied to
anther SCANNER.
2. AUTO RUN
Ⅰ.Press AUTO/DEL ,corresponding, LED is ON.
Ⅱ.Press TAP SYNC/DISPLA,Press it onee more after some time ,the
interval between two bressing is assigned to the speed of AUTO RUN ,the
maximum limit is 10 minutes .If there are many pressings more than
FUNCTION
twice ,the last two pressing are designated.
Ⅲ.Select desired bank, using UP or DOWN via MIDI signals.
Ⅳ.Press Auto/DEL once more to withdraw AUTO RUN mode.
3.MUSIC RUN
6
81-96
7
97-112
8
113-128
9
129-144
10
145-160
11
161-176
12
177-192
Press desired scanner, corresponding LED is lit ,and appropriate channels
is enabled to be adjusted, when scenes are running ,if fades control is OFF
, channel output level is not controlled by the fades ,if fades if fades
control is ON, channel 8-output leve is controlled by the fades.
2. scene button
Press one scene button to run scene or to store, and the second digit of
LCD DISPLAY showsscenes 1-8.
3.fade(1-8)
Slide the fades to adjust the output level of DMX channel from 0 to FF.
(255)
4.PAGE SELECT
Press to select page A to B
1. SPEED SLIDER
Move the slider to adjust chasing speed.
2. FADE TIME SLIDER
Move the slider to adjust FADE TIME.
3. LED DISPLAY
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
Advertisement
