Headphones/Remote Control - Philips Expanium EXP 101 Owner's Manual

HEADPHONES
Headphones (HE 545)
Connecting the headphones
• Connect the supplied headphones to p.
Remote control
Use the AY 3767 cord remote control. The buttons on the remote control have the
same functions as the corresponding buttons on the CD player.
1 If necessary press 9 once or twice until the set is switched off.
2 Connect the remote control to p and the headphones firmly to the remote control's
jack.
3 Turn the volume down with VOL E on the remote control and set VOL E on
the CD player to position 8.
Use your head when using headphones
• Hearing safety: Do not play your headset at a high volume. Hearing experts advise
against continuous extended play. If you experience a ringing in your ears, reduce
the volume or discontinue use.
• Traffic safety: Do not use while operating a motorized vehicle. It may create a traffic
hazard and it's illegal in many areas. You should use extreme caution or temporarily
discontinue use in potentially hazardous situations. Even if your headset is an
open-air type designed to let you hear outside sounds, don't turn up the volume so
high that you can't hear what's around you.
10
(supplied or optionally available)
0