Loop Recording - Motorola VERVE CAM User Manual

15. Loop Recording (via Hubble Connect
for VerveCam app)
Note: The App will remember the last used mode
and will go to that mode automatically when
connected.
Loop recording function allows you to record and
save video files in 5, 10, 20, 30 or 60 minutes looping
intervals. As long as the Camera has battery power,
videos will be recorded in a loop. At the end of a
looping interval, the Camera will continue to record
by erasing the oldest footage on that interval with the
newest. With this function, you no longer need to
worry that you will miss any important and special
moments should the memory card becomes full.
This function can only be selected in Hubble
Connect for VerveCam app.
15.1 Set Loop Recording Interval
1. Run Hubble Connect for VerveCam app on your
smartphone.
2. In the viewfinder screen, tap to select Loop
Recording mode
3. Tap
mins, 30 mins or 60 mins).
15.2 Set Loop Recording Resolution
1. Run Hubble Connect for VerveCam app on your
smartphone.
2. In the viewfinder screen, tap to select Loop
Recording mode
3. Tap
1920 x 1080, 1280x 720).
en
to select an interval (5 mins, 10 mins, 20
to select a video resolution (2560 x 1440,
Loop Recording (via Hubble Connect for VerveCam app) 19
on the bottom panel.
on the bottom panel.