Table of Contents
Advertisement
13. Record Videos (via Hubble Connect
for VerveCam app)
Note: The App will remember the last used mode
and will go to that mode automatically when
connected.
Videos will be stored on the Camera's memory
card.
1.
Run Hubble Connect for VerveCam app on
your smartphone.
2.
Go to the viewfinder screen and tap Video
mode
3.
Tap
You will hear a beep sound.
The blue LED indicator and the white video
mode indicator flash when video recording is
in progress.
4.
Tap
blue LED indicator and the white video mode
indicator stop flashing.
5.
To change video settings, tap to select the
following options:
Resolution
Slow Motion
en
on the bottom panel.
to start recording video.
again to stop video recording. The
QHD (2.5k) 2560x1440 @ 30fps (16:9)
Full HD (1080p) 1920x1080 @60fps (16:9)
HD (720p) 1280x720 @120fps (16:9)
HD (720p) 1280x720 @60fps (16:9)
HD (720p) 1280x720 @30fps (16:9)
Full HD (1080p) 1920x1080 @30fps (16:9)
ON
OFF
Record Videos (via Hubble Connect for VerveCam app) 15
Hide quick links:
Advertisement
Table of Contents
